 |
| Home | About Us | Our Products | Contact Us | Enquiry |
|
| Manufacturer & Exporter of a wide range of products which include General Laboratory Equipment such as Moisture Analyzer (Digital), Moisture Analyzer (Digital) Direct Reading, Infrared Moisture Balance, Magnetic Stirrer, Laboratory Stirrer, Tissue Homogenizer and many more items. |
|
Sturdy & versatile equipment suitable for vide range or grains, oil seeds, pulses etc. It has inbuilt battery indicator and is high speed and accurate. Technical Data: Range 8% to 40% Principle Resistance Measurement Accuracy ± 0.25 Display Three Seven Segment FND Dimension 30 (L) x 17 (B) x 20(H) cm approx. Weight 9.5 kg without accessories Temp. Compensation Automatic Power Six 9V dry Cells or 230V, AC 50Hz through adopter. Low battery indicator Yes |
Sturdy & versatile equipment suitable for vide range or grains, oil seeds, pulses etc. It has inbuilt battery indicator and is high speed and accurate. Technical Data: Range 8% to 40% Principle Resistance Measurement Accuracy ± 0.25 Display Three Seven Segment FND Dimension 30 (L) x 17 (B) x 20(H) cm approx. Weight 9.5 kg without accessories Temp. Compensation Automatic Power Six 9V dry Cells or 230V, AC 50Hz through adopter. Direct Reading Display for all commodities RS-232 Port available for interfacing Printer or Personal Computer Separate code for each commodity No Arithmetic Required Room Temperature Display |
|
|
Aluminum body duly finished with hammer tone paint, heat control with electronic regulator. Easy to operate. With accuracy of 0. 2% by direct reading 0. 1%. complete with l-shaped thermometer, 10-disposal pan, one tweezer and instructional manual. Range A) 5gms B) 10gms C) 25gms |
It has a compact stirring device utilizing magnetic field (created by a permanent magnet) which induces variable speed stirring action. Stirring is accomplished by means of small teflon rotor, which when placed to be stirred is capable or rotation by magnetic field applied from below the container. The unit is fitted with pilot lamp. Works on 220/230 volts A.C. Cabinet Size: A) 1 litr. B) 2 litrs. C) 5 litrs. |
|
|
The motor stirrer having maximum speed up to 4000 R.P.M. Unit is clamped to C.P. provided rod fitted on a heavy cast iron base. The height and of the stirrer can be adjusted according to the requirement. Variable speed motor with 1/20 H.P. Regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation. Optional: Automatic 0-60 minutes Timer. |
Heavy & stable cast iron base duly painted with mild steel chrome plated upright provided with strong adjustable clamps to hold motor with stirring rod of stainless steel with teflon grinder and clamp to hold tissue homogenizing vessel of borosilicate glass which is also adjustable. Speed variable trough a control unit to work on 220V AC 50Hz single phase Motor used is of 1/20 H.P a) Homogenizing vessel 25 ml. b) Homogenizing vessel 50 ml. c) Homogenizing vessel 100 ml. |
|
|
Suitable for vdrl and others agglutination tests, blood grouping tests and for mixing solutions in small flasks, breaker or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel/power coated paint. Tray type platform size 300x300 mm can take cavity slides, bottles flask etc; for shaking at a fixed speed by a help of spiring wires. Standard fixed speed 180 rpm. An automatic 60 minutes timer can be provided against extra cost as optional by which shaking duration can be set. To work on 220v ac 50hz single phase. Note: variable speed rotator can be offered on demand. Optional: 0-60 minutes timer. |
Heavy cast iron base with sturdy construction with two side arms for holding flasks. A heavy duty fractional motor with variable speed controller is provided. The holder can hold flasks or capacity 100 to 1000 ml. Supplied complete with cord & plug etc. To work on 220V AC 50Hz single phase. Speed 80-280 oscillations. Capacity of holding A) 4 flasks. B) 8 flasks. Optional: Automatic 0-60 minutes timer. |
|
|
Useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes etc. The housing is 150 x 150mm. The speed is regulated by a speed control devices. Shorts eccentric stroke motor imparts vigorous agitation to the tubes or flasks. Body of strong and finished in white stoving enamel/powder coated paint with mat finished color combination. The equipment is workable on 220V AC 50Hz single phase. |
Designed for shaking KAHN racks, bottles, flasks of different size by adjusting compartments. Fitted with heavy duty motor to work on 220V, AC 50Hz single phase. The rate of motion is adjustable mechanically by belt tension. Speed is fixed in same models to approximately 275. Size of Carrier Strokes per Minutes Motor Body Type a) 20”x13”x4” 275 0.25 HP open b) 20”x13”x4” 275 0.25 HP covered c) 20”x13”x4” 150 to 250 0.25 HP open d) 31”x17”x4” 150 to 250 0.25 HP covered e) 36”x18”x4” 150 to 250 0.50 HP covered NOTE: Specific sizes & capacities can be offered on demand. |
|
|
Body made out of thick mild steel finished in stoving enamel/powder coated paint. Heavy duty motor of suitable capacities are provided for long duration operations. Fixed speed and variable speed models are offered. Platform is provided with rubber discs or stainless steel clamps to hold flasks. To work on 220V AC 50Hz single phase. The choices are available are: Platform size Holding cap. Motor HP a) 45x45cm 25 flasks of 100ml 0.25 b) 45x45cm 36 flasks of 50ml 0.25 c) 45x45cm 15 flasks of 250ml 0.25 d) 55x55cm 25 flasks of 250ml 0.25 e) 65x65cm 36 flasks of 250ml 0.25 f) 100x100cm 81 flasks of 250ml 1.00 g) 100x100cm 81 flasks of 500ml 1.00 NOTE: Specific sizes & capacities can be offered on demand. |
Recommended for grinding dry plant samples. Also for a great variety of commercial dry materials. The unit has two stationary steel edges provided in the cast Iron chamber. A removable safety Glass sheet plate from the face of chamber of permit observation during operation. Willey Mill is fitted on substantial Cast iron base. Complete unit supplied with aluminium/ Cast Chamber. Polished hoper with cover, wooden plunger, three delivery tubes mounted with sieves cloth mesh no:20, 40 and 60 mesh. One Allen Key for adjusting blades and 3 Glass Jars, brush etc. Electrically operated to work on 220 Volts AC. Chamber size Motor cap. a) 40x25mm 0.25 H.P. b) 65x25mm 0.25 H.P. c) 100x50mm 0.50 H.P. d) 200x75mm 1.00 H.P. |
|
|
Electrically operated heaving capacity from a few grams, to 1 kg. or 2 kg or 5 kg. Fitted with a F.H.P. motor cap. up to 2 kg. jar and with ¼ H.P. Heavy-duty motor for 5 kg. jar. Maximum speed 80 R.P.M. supplied with steel balls for mixing and grinding particularly soft powder. Operates on 220 Volts AC. mains. Capacity a) 1 kg jar b) 2 kg jar c) 5 kg jar. OPTIONAL: Automatic 0-60 minutes Timer. |
Vacuum pumps are V Belt driven at 400 rpm and fitted with electric motor mounted on a cast iron base plate. Material of construction is specially chosen (graded cast iron) and all the parts are precisely machined. Micron finished and assembled to close tolerance for high efficiency. Pumps are supplied either single stage or double stage. Single stage pump creates maximum vacuum of 0.01 Hg. Column and double stage creates 0.01 Hg. Suitable to work 220 V single phase, 50 Hz power supply. Following the range of vacuum pumps (Single/Double stage) Capacity Motor a) 25 lt/mm 0.25 hp b) 45 lt/mm 0.25 hp c) 75 lt/mm 0.25 hp d) 100 lt/mm 0.5 hp e) 150 lt/mm 0.5 hp f) 200 lt/mm 1.0 hp g) 300 lt/mm 2.0 hp Optional: i) High Vacuum oil per liter. ii) Moisture Trap, with non return valve and vacuum gauge with regulator combined. |
|
|
Electrical operated dome type sturdy stable heavy body with resiliently mounted motor working on 220V AC 50Hz single phase for vibration free performance with built in 5- speed regulator and non-removable swing out rotor. Complete with tube carriers. Maximum speed 3500 RPM. Neatly finished in stoving enamel. a) 4x15ml tubes. b) 6x15ml tubes. c) 8x15ml tubes. OPTIONAL: 0-60 minutes timer. |
3500 to 4500 R.P.M. With speed regulator and plug & cord. Capacity A) 4x15ml tubes. B) 6x15ml tubes. C) 8x15ml tubes. |
|
|
4000 to 5000 R.P.M fitted with electronic solid state speed regulator top cover made of transparent acrylic sheet cord & plug Capacity a) 4x15 ml tubes. b) 6x15 ml tubes. c) 8x15 ml tubes. d) 12x15 ml tubes. Optional: i) Automatic Timer (Manual) ii) Automatic Timer (Digital) iii) Speed Meter (Manual) iv) Speed Meter (Digital) |
Latest model designed for quick and convenient measurement of refractive index and also dispersion of liquids and solids. In additional a sugar scale in provided facilitating measurement of percentage of sugar in solution. Useful for measuring refractive index in the range of 1.3 to 1.7 with an accuracy of 0.01 direct on scale and 0.0001 by estimation. Sugar percentage of 0-95 % with an accuracy of1% on scale and 0.01 by estimation can be measured. Packed in a wooden cabinet. |
|
|
A pocket refract meter designed on the principle of total reflection for measuring the refractive index. Built in ocular scale, on inspection, gives direct reading for percentage of sugar density. A) Range 0-32% in division of 0.2% B) Range 28-62% in division of 0.2% C) Range 58-92% in division of 0.2% |
Designed on laurent’s half shade principle for accurate results. Equipped with polarizing unit analyzer precisely graduated scale capable of rotation and divided in single degrees vernier reading to 1/10 supplied complete with 200 mm polarimeter tube, hand magnifier for easy reading of vernier packed in cabinet. |
|
|
Latest polarimeter equipped with imported optical components and to accept observation tube up to 220mm length sensitive and accurate glass scale is divided to read angular degrees and also carrier sugar scale in iss units. The angular scale from 0-360 degrees is sub-divided 0. 2º the sugar scale from 30º to 120º iss units enable direct reading to . 1 and by estimation , 05 sugar degrees. Complete with polarimeter tube 200mm in a wooden cabinet. |
Made out of borosilicate glass with screw cap and bubble trap a) Length 100mm b) Length 200/220mm c) Length 400mm |
|
|
Made out of borosilicate glass. A) Length 100mm B) Length 200mm C) Length 400mm |
Latest design to a accept tubes up to 400 mm complete with 100 mm 200 mm, 400 mm polarimeter tube. |
|
|
EDI-201 Slide Box Supreme 50 EDI-201A Slide Box Supreme 100 EDI-202 Slide Cabinet Super Deluxe Wooden Grooves 500 EDI-202A Slide Cabinet Super Deluxe Wooden Grooves 1000 EDI-202B Slide Cabinet Super Deluxe Wooden Grooves 2000 EDI-202C Slide Cabinet Super Deluxe Wooden Grooves 5000 EDI-202D Slide Cabinet Super Deluxe Wooden Grooves 10000 EDI-203 Slide Cabinet Horizontal 500 EDI-203A Slide Cabinet Horizontal 1000 EDI-203B Slide Cabinet Horizontal 2000 EDI-204 Slide Cabinet Universal-combined horizontal and Vertical 1600 EDI-204A Slide Cabinet Universal-combined horizontal and Vertical 2000 EDI-204B Slide Cabinet Universal-combined horizontal and Vertical 4000 EDI-205 Slide Cabinet Deluxe Aluminium Grooves 500 EDI-205A Slide Cabinet Deluxe Aluminium Grooves 1000 EDI-205B Slide Cabinet Deluxe Aluminium Grooves 2000 EDI-205C Slide Cabinet Deluxe Aluminium Grooves 5000 EDI-205D Slide Cabinet Deluxe Aluminium Grooves 10000 EDI-206 Slide Box for Transparency Slides 2”x2” 200 EDI-206A Slide Box for Transparency Slides 2”x2” 100 EDI-206B Slide Box for Transparency Slides 2”x2” 50 EDI-206C Slide Box for Transparency Slides 2”x2” 25 EDI-207 Slide Cabinet for Transparency Slides 2”x2” 525 EDI-207A Slide Cabinet for Transparency Slides 2”x2” 1050 EDI-208 Slide Cabinet with sorter 960 EDI-208A Transparency Slide sorter 35 EDI-208B Trolley for slide cabinets EDI-209 Slide Tray, Aluminium 20 EDI-210 Slide Tray, Wooden |
EDI-211 herbarium press for laboratory use 45 x 30 cm EDI-211A herbarium press for Field use 45 x 30 cm EDI-212 herbarium cabinet 6 drawers EDI-212A herbarium cabinet 12 drawers EDI-212B herbarium cabinet 24 drawers EDI-213 fumigant chamber 90 x 60 x 90 cm EDI-213A fumigant chamber 75 x 50 x 75 cm EDI-213B fumigant chamber 60 x 38 x 60 cm EDI-214 botanical vasculum 45 x 15 x 25 cm EDI-214A botanical vasculum 60 x 20 x 30 cm EDI-215 chromatography cabinet for 6 filter papers 57 x 68 cm EDI-215A chromatography cabinet for 6 filter papers 46 x 57 cm EDI-216 riker Specimen shower 45 x 30 x 5 cm |
|
Mr. Varun Chopra
(CEO)
Edutek House, 29- B, Inderpuri, Ambala Cantt
Ambala,
Haryana -
133 001,
India
Telephone: +(91)-(171)-2654329
© Edutek Instrumentation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
