 |
| Home | About Us | Our Products | Contact Us | Enquiry |
|
| Our product range includes a wide range of Heat And Refrigeration System such as Hot Air Universal Oven (Memmert Type), Drying Oven Industrial, Tray Dryer, Bottle Dryer, Oven Vaccum, Incubators Bacteriological and many more items. |
|
Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in shoved enamel off white paint or pastle mat finish colour combination. Kanthal wire heating elements provided on three sides attain quick and uniform heating in range of 50°C to 250°C ± 2 C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power, thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase. (Chambers size in mm/Inches) No. of Capacity H W D (Approx.) Shelves (Approx) a) 300 x 300 x 300 (12”x12”x12") 2 28 ltrs. b) 350 x 350 x 350 (14”x14”x14") 2 45 ltrs. c) 450 x 450 x 450 (18”x18”x18") 2 95 ltrs. d) 600 x 450 x 450 (24”x18”x18") 2 125 ltrs. e) 600 x 600 x 600 (24”x24”x24") 2 224 ltrs. f) 900 x 600 x 450 (36”x24”x18") 2 252 ltrs. g) 900 x 600 x 600 (36”x24”x24") 2 336 ltrs. h) 900 x 900 x900 (36”x36”x36") 3 480 ltrs. OPTIONALS : Air circulating fan. Timer 0-24 hours Digital temperature Indicator. Digital temp indicator-cum-Controller. |
Standard double wall fabrication. Inner & output chamber made out of thick mild steel sheet. Inner chamber backed silver paint finish and exterior finished in hammertoe. Heavy duty forced air blowers are provided to constantly circulated hot air to achieve uniform temp. In the whole chamber. Double wall door is mounted on heavy hinges and provided with heavy molded latch. Temperature is controlled by a thermostat and it can be read on dial type thermometer. Temperature range: 50º C to 250º C ± 2º C to 5º C and equipment is workable on 220 workable on 220V AC 50Hz single phase or 440 volts AC supply. (Chambers size in mm/Inches (HxWxD) Approx. a) 900 x 600 x 600 (36”x24”x24") b) 1200 x 900 x 600 (48”x36”x24") c) 1500 x 900 x 900 (60”x36”x36") d) 1800 x 1200 x 900 (72”x48”x36") Optionals : I) Timer 0-24 hours. Ii) Digital temp. Indicator -cum-Controller. Note: Please ask for the other capacities of your requirement. |
|
|
Standard sturdy double wall fabrication. Inner & outer chamber made out of thick mild steel sheet. Inner chamber backed silver paint finish and exterior finished in hammer tone. Heavy duty forced air blower are provided to constantly circulate hot air to achieve uniform temperature in the hole chamber. Double wall door is mounted on heavy hinges and provided with heavy molded latch. Temperature is controlled by a thermostat and it can be read on dial type thermometer. Temperature range: 50º C to 250º C ± 2º C to 5º C and equipment is workable on 220 V AC 50Hz single phase or 440 volts A C supply. (Chambers size in mm(WxDxH) Tray Capacity a) 300 x 300 x 300 8 trays of 16”x32”x1¼ size. b) 350 x 350 x 350 12 trays of 16”x32”x1¼ size. c) 450 x 450 x 450 24 trays of 16”x32”x1¼ size. d) 600 x 450 x 450 48 trays of 16”x32”x1¼ size. e) 600 x 600 x 600 96 trays of 16”x32”x1¼ size. Optionals : i) Timer 0-24 hours. ii) Digital temp. Indicator-cum-Controller. Iii) Aluminum Tray 16”x32”x1¼” size. |
Standard specifications as per BDI-50A & 51. Complete with thermostatic temp. Control, dial type thermometer, double wall construction and two side opening doors. Temperature attained uniformly by forced air circulation heavy duty blowers. A) For 8 crates of size 18’x15”x6”. b) For 10 crates of size 18’x15”x6”. c) For 12 crates of size 18’x15”x6”. Optional: i) Timer 0-24 hours. ii) Digital temp. Indicator -cum-Controller. Iii) Crate of size 18’x15”x6” Note: Please ask for other capacities of your requirement. |
|
|
Double walled construction. Inner round chamber made out of stainless steel, exterior made out of mild steel duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Temperature range 50º C to 130º C ± 3º C. The body capable of with standing vacuum of 760 mm Hg. Workable on 220V AC 50 Hz single phase. Supplied without Vacuum pump. Chamber size in mm Dia x Depth Capacity.(Approx.) a) 250x300 12 ltrs. b) 300x300 17 ltrs. c) 300x500 40 ltrs. Optional: i) Timer 0-24 hours. ii) Imported Thermostat”EGO”/”JUMO”German, Accuracy of ± 0.1ºC. iii) digital temp. Indicator-cum-Controller. Iv) Microprocessor PID digital temp. Indicator-cum-controller. |
Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet and outer made out of thick mild steel finished in white stoving enamel/powder coated paint with mat finished color combination. Double wall door with double glass window for observation in the chamber. Temperature range 5º C above ambient to 80º C ± 1º C controlled by a thermostat. The equipment is workable on 220V Ac 50 Hz single phase. (Chambers size in mm/Inches) No. of Capacity H W D (Approx.) Shelves (Approx) a) 300 x 300 x 300 (12”x12”x12") 2 28 ltrs. b) 350 x 350 x 350 (14”x14”x14") 2 45 ltrs. c) 400 x 400 x 400 (16”x16”x16”) 2 65 ltrs. d) 450 x 450 x 450 (18”x18”x18") 2 95 ltrs. e) 600 x 450 x 450 (24”x18”x18") 2 125 ltrs. f) 600 x 600 x 600 (24”x24”x24") 2 224 ltrs. g) 900 x 600 x 450 (36”x24”x18") 2 252 ltrs. h) 900 x 600 x 600 (36”x24”x24") 2 336 ltrs. i) 900 x 900 x900 (36”x36”x36") 3 480 ltrs. Optional: i) Air circulating fan. ii) Timer 0-24 hours iii) Imported Thermostat “EGO”/ “JUMO” German with the accuracy of ± 0.5º C. iv) Digital temp indicator-cum-Controller. v) Microprocessor PID digital temp. Indicator-cum-controller. |
|
|
Inside made of stainless steel. Temperature range is above ambient 5º c to 90º c. The chamber has air circulating fan to ensure uniformly of temp. A carrier to hold bottles ( 6 number of 60 mm dia. X 200 mm depth) can be easily placed on front of rotator mechanism. Any bottle can be taken out easily from the carrier. The carrier rotates with bottles parallel to the door at a variable speed. Viewing glass window in the specimen inside the chamber. Complete with microprocessor pid digital temp. Indicator-cum-controller with pt 100 sensor. |
Outer wall is made of M.S. Sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combination and inside OS stainless steel. The gap between inner and outer wall is filled with high grade mineral glass wool. Temperature range from ambient to 70º C is controlled by “EGO” / “JUMO” German capillary type thermostat with an accuracy of ± 0.5º C. The unit is provided with manual tilting device, so as to tilt the tray holding the eggs. To work on 220/230 volts A.C. Supply. Capacity a) 50 eggs. b) 100 eggs. c) 200 eggs. d) 250 eggs. |
|
|
Double wall construction. Inner chamber made richly anodized aluminum or highly polished stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in write stoving enamel/powder coated paint with mat finished color combination. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door unbreakable acrylic transparent sheet for inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Temperature is controlled by deluxe digital controller from 5º c to 50º c ± 0. 5º c. Standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made with in the chamber for higher temperature working. Inner air circulating system is provided to achieve uniform temperature. A control panel is provided with various indicators, on-off switch. Supplied with cord and plug etc. To work on 220v AC 50 HZ single phase. Inner chamber sizes in mm capacity in cu. Ft. capacity w x d x h (approx. ) a) 405x405x405 (bench top model) 2. 4 cu. Ft. 65 ltrs. b) 455x410x610 4 cu. Ft. 112 ltrs. c) 505x415x830 6. 1 cu. Ft. 171 ltrs. d) 565x565x865 10 cu. Ft. 280 ltrs. e) 650x580x900 12 cu. Ft. 336 ltrs. f) 700x650x900 15 cu. Ft. 420 ltrs. Optional: i) Timer 0-24 hours day night cycle. ii) Co2 /air mixer nozzle is provided. iii) Internal illumination with 3 fluorescent tubes. iv) Microprocessor PID digital temp. Indicator-cum-controller. v) Automatic voltage stabilizer 3-5 KVA (recommended-must). |
Standard double wall construction. Outer chamber made out of mild steel finished in white stoving enamel/powder coated paint with mat finished color combinations. Inner chamber made of stainless steel sheet. The double door is provided with double glass full view window. Interchangeable platform has been provided. Temperature range 5º c above ambient to 60º c ± 1º c is controlled by a digital controller. Variable speed control regular controls the speed up to 200 rpm . Supplied complete to work on 220v AC 50 Hz single phase. Capacity 16x500ml conical flasks. Optional : i) Timer 0-24 hours. ii) Imported thermostat”ego”/”Jumo”German, accuracy of ± 0. 5ºc. iii) Digital temp. Indicator-cum-controller. iv) Microprocessor PID digital temp. Indicator-cum-controller. |
|
|
Same as EDI-56 but temperature range 5º C to 60º C with lighting arrangement. |
Designed for vast number of incubation applications. Can be installed even in hallway room or wherever convenient. Design feature includes enameled mild steel sheet exterior, aluminum / stainless steel, interior ventilators, internal lighting, exhaust fan etc. Suitable insulated 300 mm sq. Inspection window at the door permits inside view with -out opening the door. Complete with panel. Pre fabricated at factory assembled at site. Complete with cord and plug to work on 220 V single phase 50 Hz power supply. Temperature range from 5º C above ambient to 60º C ± 1º C. Controlled by digital indicator -cum -controller. Available sizes W x H x D a) 1.2x2.3x1.2 meter b) 2.3x2.3x2.3 meter |
|
|
Same as EDI-56B but with controlled humidity up to 95% ± 5% Available sizes W x H x D a) 1.2x2.3x1.2 meter b) 2.3x2.3x2.3 meter |
Same as EDI-56C but temperature range 10º C to 60º C. Available sizes W x H x D a) 1.2x2.3x1.2 meter b) 2.3x2.3x2.3 meter |
|
|
Temperature range from ambient temperature to 80º C. Thermostatic control with accuracy of ± 0.5º C. Double walled , inside stainless steel and outside mild steel painted in epoxy powder coating . Bath consists of two pilot lamps. Temperature control knob and on/off switch. To work on 220/230 volts A.C. Supplied with or without stirring arrangement , without racks and thermometer. Lid of water bath is made of stainless steel sheet. Size inside chamber (Stainless Steel) Capacity (Approx.) a) 300x200x175 mm (suitable for 2 racks) 14 ltrs. b) 375x300x175 mm (suitable for 4 racks) 18 ltrs. c) 455x300x175 mm (suitable for 6 racks) 25 ltrs. d) 605x300x175 mm (suitable for 8 racks) 32 ltrs. OPTIONAL: i) L-shaped thermometer (fitted with water bath). ii) Imported Thermostat “EGO” / “JUMO” German with an accuracy of ± 0.5º C iii) Digital temp. indicator-cum-Controller. iv) Microprocessor PID digital temp. Indicator-cum-controller. v) Stirrer with 1/20 H.P. High speed motor with stainless steel stirring rod and blade. |
Temperature range from ambient temperature to 95º c. Thermostatic control with an accuracy of ± 1º c. Double walled, inside stainless and outside mild steel sheet painted in epoxy powder coating. Top of the bath and concentric ring of stainless steel. To work on 220/230 volts a. C. size inside (stainless steel) capacity (approx. ) a) 300x250x100 mm 6 holes of 75 mm dia. 8 ltrs. b) 355x405x100 mm 12 holes of 75 mm dia. 15 ltrs. optional: i) imported thermostat “EGO” / “jumo” german with the accuracy of ± 0. 5º c. ii) digital temp. Indicator-cum-controller. |
|
|
Made of stainless steel sheet. Top of the bath and concentric rings are of stainless steel. Heating elements have an automatic cut off device when the bath gets dry. Electrically operated on 220/230 volts A.C. Size inside (Stainless Steel) Capacity (Approx.) a) 300x250x100 mm 6 holes of 75 mm dia. 8 ltrs. b) 355x405x100 mm 12 holes of 75 mm dia. 15 ltrs. |
Construction is as per EDI-57. But with glass windows on both opposite sides for observation. Temperature controlled by mercury contact thermometer with a sensitivity of ± 1º C. Suitable for precision laboratory activities requiring constant temperature with high degree of accuracy. Complete stirrer, workable on 220 V AC 50 Hz single phase. Chamber size in mm & Inches. a) 425x250x225 mm (17”x10”x9”) b) 450x375x375 mm (18”x15”x15”) c) 600x450x450 mm (24”x18”18”) Optional: I) Digital temperature indicator-cum-controller instead of contact thermometer. ii) Microprocessor PID digital temp. Indicator-cum-controller instead of contact thermometer. |
|
|
Body specification as per EDI-58 with Standard double walled water bath but provided with cups & sleeves for glass tubes. a) 4 cups & 6 sleeves. b) 6 cups & 8 sleeves. c) 12 cups & 14sleeves. |
Double wall round construction . Inner chamber stainless steel /black anodized aluminium and outer made out of mild steel painted in epoxy powder coating. Thermostatic control . Temp. Range 5º c above ambient to 80º c ± 1º c. Complete with indicators, wire plug. To work on 220 v . A. C. Without thermometer. dia depth a) 200 mm x 75 mm b) 250 mm x 125 mm |
|
|
Double wall construction. Inner chamber made of highly polished stainless steel sheet and the outer is made of mild sl duly finished in white stoving enamel/powder coated paint with mat finished color combination. Temperature range 50º C to 250º C ± 2º C is controlled by a thermostat. Supplied complete with stirrer, diffuser shelves, cover etc. Chamber size in mm & inches Approx. a) 250x250x250 mm (10”x10”x10”) b) 300x300x250 mm (12”x12”x10”) C) 350x350x250 mm (14”x14”x10”) Optional: i) Mercury contact thermometer and relay with accuracy better than 1º C. ii) Imported Thermostat “EGO” / “JUMO” German with an accuracy of ± 1º C iii) Digital temp. indicator-cum-Controller. iv) Microprocessor PID digital temp. indicator-cum-controller. |
Useful for dual purpose. It is a combination of serological and routine rectangular water bath with with holes and concentric rings. Standard double wall construction. Inner chamber made out of highly polished stainless steel sheet ad exterior made out of thick mild steel duly finished in stoving enamel/powder coated paint. Immersion heaters are provided for heating to attain temp. Range from 5º c above ambient to 95º c ± 1º c. The equipment to work on 220 v ac 50hz single phase. Chamber size in mm & inches capacity approx. a) 300x225x175 mm (12”x9”x7”) 14 ltrs. b) 450x300x175 mm (18”x12”x7”) 25 ltrs. Optional: i) Stirring arrangement with stainless steel rod & blades. ii) Imported thermostat “ego” / “jumo” german with an accuracy of ± 0. 5º c iii) Digital temp. Indicator-cum-controller. iv) Microprocessor pid digital temp. Indicator-cum-controller. |
|
|
Standard construction, inner chamber made out of stainless steel sheet with digital temp. Controller -cum-indicator. Temperature can be controlled from range minus(-) 20º c to plus(+) 20ºc. Chamber size: capacity (approx. ) a) 450x300x300 mm 42 Ltrs. Optional: i) Microprocessor PID digital temp. Indicator-cum-controller. |
Temperature range from room temperature to 95º C. Thermostatic control with an accuracy of ± 1º C. Double walled, inside of stainless steel and outside mild steel sheet, painted in epoxy powder coating. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 r.p.m. Shaking tray can hold either test tubes or flask of 25ml, 50ml, 100ml. To work on 220/230 volts A.C. without R.P.M. Indicator. Shaking Tray Size (Stainless Steel) Capacity Approx. a) 275x275x150 mm 12 ltrs. b) 405x300x150 mm 18 ltrs. Optional: i) L-shaped thermometer (fitted with water bath). ii) Imported Thermostat “EGO” / “JUMO” German with an accuracy of ± 0.5º C iii) Digital temp. indicator-cum-Controller. iv) Microprocessor PID digital temp. Indicator-cum-controller. v) Stirrer with 1/20 H.P. High speed motor with stainless steel stirring rod and blade. vi) Shaking tray for 25ml, 50ml, 100ml, 250ml, 500ml, 25 mm dia. Test tube or conical flasks. |
|
|
Wall hanging casted aluminum vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging arrangement is provided. The condenser is seamless. Fitted with automatic ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made out of thick stainless sheet. Output Capacity (Approx.) a) Output approx.2 liters per hour. b) Output approx.3/4 liters per hour. c) Output approx.5/6 liters per hour. |
Wall hanging with specification as Model EDI-68 but made of stainless steel sheet Output Capacity (Approx.) a) Output approx.2 liters per hour. b) Output approx.3/4 liters per hour. c) Output approx.5/6 liters per hour. |
|
|
An alternative to traditional methods of sterilizing once switched ‘ON’ the units are ready to use with in 30 minutes and ensure total distraction of all microorganism within seconds. Preset temp. Of 230º C- 250º C, incorporated with a thermostat with an accuracy of ± 1º C of the preset range. These are compact enough to be placed on any laminar air flow bench or any other work side table in a clean room. To work on 220 volts A.C. A) Crucible size: 2” Dia x2” Depth B) Crucible size: 2” Dia x6” Depth. |
This block is comprised of an outer case with heater and thermostat, fitted with aluminum blocks drilled to accept test tubes of 25mm dia. Temperature control by means of thermostat. Outside painted in epoxy powder coating. Outer case is insulated and ventilated. Temperature range 90º c. To 300º c. The chamber has 40 holes to accept 25mm dia. Test tubes. Optional: i) Digital temp controller-cum-indicator. ii) The above chamber with 40 holes to accept 13 and 19mm test tubes can also be made available on demand. |
|
|
Outer shell made out of thick mild steel duly finished in attractive stoving enamel/powder coated paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000º C and working temp. 900º C controlled by SUNVIC energy regulator. Complete with indicators, pyrometer,thermocouple, thermal fuse etc. Workable on 220V AC 50 Hz single phase. Inner Muffle size in mm & inches a) 225x100x100 (9”x4”x4”) b) 250x125x125 (10”x5”x5”) c) 300x125x125 (12”x5”x5”) d) 300x150x150 (12”x5”x5”) e) 300x200x200 (12”x6”x6”) f) 350x175x125 (14”x7”x5”) g) 475x175x125 (19”x7”x5”) h) 450x225x225 (18”x9”x9”) OPTIONAL: i) Digital temp. Indicator-cum-controller instead of energy regulator and pyrometer. ii) Microprocessor PID digital temp. Indicator-cum-controller instead of Energy regulator, pyrometer. |
The furnace is insulated with ceramic fiber blanket of high density for better insulation. The furnace can run continuously at 1150º C, trouble free. The furnace is quick heating type, light in weight, table mounting type, compact, elegant in design. Outer painted in epoxy powder coating. The hinged type swing door insulated with ceramic fiber to avoid heat losses from the door. The furnace of fitted with digital temperature controller-cum-indicator to avoid over heating for long life and trouble free working. The panel is fitted at the top of the furnace.Inner Muffle size in mm & inches a) 225x100x100 (9”x4”x4”) b) 250x125x125 (10”x5”x5”) c) 300x150x150 (12”x6”x6”) d) 300x200x200 (12”x8”x8”) e) 450x225x225 (18”x9”x9”) Optional: i) Microprocessor PID digital temp. Indicator-cum-controller. Note: 1400º C Muffle Furnace can be offered in demand. |
|
|
It with stands high temperature up to 350º c. The body of the mantle is spun in one piece from non-rusing aluminium (up to 5. 0 liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. All heating mantels are lagged with special grade mineral wool. Works on 220/230 volts a. C. capacity wattage a) 50ml 60 b) 100ml 60 c) 250ml 150 d) 500ml 200 e) 1ltr. 300 f) 2ltrs. 450 g) 3ltrs. 450 h) 5ltrs. 600 |
Body is fabricated out of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. The hot plate made of cast iron or top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the late to operate on 220 v 50 Hz single phase. Temp. Is controlled by a three-heat rotary switch/energy regulator as per demand. a) Hot plate: (round) single specification as above with 20 cm (8”) dia. Mounted top/ss sheet top. b) Hot plate: (round) double as per edi-75 but two plates of 20 cm (8”) dia. Having independent pilot lamps & switches. c) Hot plate (rectangular) As per edi-75 but plate is rectangular shape. Following standard size is available: a) 30x25 cm (12”x10”) b) 40x25 cm (16”x10”) c) 45x30 cm (18”x12”) d) 60x45 cm (24”x18”) Optional: i) Sunvic energy regulator can be provided against routine energy regulator. ii) Digital temp. Indicator-cum-controller. |
|
|
Temperature range ambient temp. To 70º C i.e. Below the melting points of wax. The temperature is thermostatically controlled. The body is the made out of thick mild steel duly finished in white stoving enamel/powder coated paint with mat finished color combination and top is made of highly polished aluminum sheet. To work on 220 V 50 Hz single phase. Top plate size (Length x Width) a) 30x25 cm (12”x10”) b) 40x25 cm (16”x10”) c) 45x30 cm (18”x12”) d) 60x15 cm (24”x6”) |
For determination of melting points up 350º c. The mounted block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and mercury thermometer. The temperature is regulated by energy regulator fitted to the unit. The lamp provides uniform and shadow less light, regulator fitted to the unit. Supplied without capillary tubes and thermometer. |
|
|
Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts are duly chrome plated. Housing provided with heating mantels for surface temp. Up to 300º c. Provided with a common energy regulator to control all unit, individual on-off switches & pilot lamps. To work on 220 v ac. Without glass parts. a) The unit of 3 mantles rating 500 watts. b) The unit of 6 mantles rating 750 watts. a) Soxhlet extraction unit:(heater type) Heaters have individual on-off switches & indicators. Provided with a common energy regulator to control all units. Without glass parts. 1) A unit of 3 heaters. 2) A unit of 6 heaters. b) Soxhlet extraction unit:(hot plate type) 1) A unit of 3 heaters. 2) A unit of 6 heaters. c) Soxhlet extraction unit:(bath type) i. Single wall - chamber made of stainless steel and provided with individual on- off switches but having on energy regulator to control all units. Without glass parts. a) A unit of 3 baths. b) A unit of 6 baths. ii. Double wall - inner chamber made of stainless steel, other specification as above. Without glass parts. a) A unit of 3 baths. b) A unit of 6 baths. Optional: sunvic energy regulator can be provided with all above units. Note: all above units are without glass parts. |
Made out of mild steel duly finished in white stoving enamel/powder coated paint with mat finished color combinations other metallic parts are chrome plated. All following units are available without glass parts. a) Kjeldhal digestion units: useful for estimation of nitrogen contents in substance by digestion in 300 & 500 ml flasks. Provided with fume duct (optional) made of lead and pair of hangers. Workable on 220v ac 50 Hz single phase. Individual on-off switches and one energy controller for all units is provided. 1) Unit of 3 tests (heater type) 2) Unit of 6 tests (heater type) 3) Unit of 3 tests (mantle type) 4) Unit of 6 tests (mantle type) Optional: i) Fume duct made of lead or borosilicate glass. ii) Sunvic energy regulator. b) Kjeldhal distillation units: asbestos tops mounted on mild steel tubular stand. Provided with condenser clamps and water manifold. Other specification as above. a) Unit of 3 tests (heater type) b) Unit of 6 tests (heater type) c) Unit of 3 tests (mantle type) d) Unit of 6 tests (mantle type) Optional: i) Sunvic energy regulator c) Kjeldhal distillation & digestion units: (combined) one single mild steel tubular stand is provided with two heating shelves, one above other. A fume duct holder and a heating box are supplied for digestion units. The heating unit heating unit has individual on-off switches. In the upper portion another heating unit condenser rack is provided. The unit is workable on 220v ac 50hz single phase. a) unit of 3 tests (heater type) b) unit of 6 tests (heater type) c) unit of 3 tests (mantle type) d) unit of 6 tests (mantle type) Optional: i) Fume duct made of lead or borosilicate glass. ii) Sunvic energy regulator. Note: All above units are without glass parts. |
|
|
Suitable for general laboratory use and sterilization. Stainless steel or aluminium vertical body. Pressure range 15 PSI to 18 PSI. Domed cover can be sealed by joint-less gasket which is clamped to the vessel by wing nuts by hinged bolts which engage slotted lugs on rim of the cover. Provided with dial pressure gauge. Spring loaded safety valve has threaded CP for pressure adjustments. Supplied complete with plug & cord and is suitable to work on 2 20V AC 50Hz single phase. Size Dia x height in mm A) 300x300 mm [Seamless] B) 300x375 mm [Jointed] C) 300x500 mm [Jointed] |
A versatile, electrically heated sterilizers under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jackets made of stainless steel. The outer chamber is made out of thick mild steel/stainless st eel. The mid is made of thick stainless steel plate (joint less) or gunmetal and can be sealed by a joint less neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy ± 3 psi. All autoclaves are fitted with standard accessories, such as, a drain cork, pressure gauge, steam release cock, spring loaded safety valve and heating element, but supplied without dressing bins. Chamber size in mm & load: Capacity Dia x Depth Load (Approx.) a) 250 x 450 mm 2 KW 22 ltrs. b) 300 x 500 mm 3 KW 40 ltrs. c) 350 x 550 mm 4 KW 50 ltrs. d) 400 x 600 mm 5 KW 78 ltrs. e) 450 x 600 mm 5 KW 98 ltrs. f) 500 x 750 mm 6 KW 152 ltrs. OPTIONAL: i) Automatic low-water level cut off-device. ii) Pressure control switch. iii) water level arrangement. iv) Dressing bins for various sizes. |
|
|
Most useful for sterilizing the loaded material under a steam pressure of 10 to 20 psi (adjustable). It has inner chamber, steam jacket and outer wall made of S.S. duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss. The lid of made of thick stainless steel and closed by radial type closing arrangement. Fitted with a gasket made up of neoprene rubber, safety valve. Drain cock, water inlet, water level indicator, steam release valve, pressure gauge, pedal lifting device and S.S. basket . Supplied complete with cord and plug to work on 220/440 volt A.C. supply . And supplied without dressing bins. Dia x Depth Load Capacity (Approx.) a) 250 x 450 mm 2 KW 22 ltrs. b) 300 x 500 mm 3 KW 40 ltrs. c) 350 x 550 mm 4 KW 50 ltrs. d) 400 x 600 mm 5 KW 78 ltrs. e) 450 x 600 mm 5 KW 98 ltrs. f) 500 x 750 mm 6 KW 152 ltrs. OPTIONAL: i) Automatic low-water level cut off-device. ii) Pressure control switch. iii) Dressing bins for various sizes. |
Most ideal for any institute or laboratory doing bulk sterilizing and research work. This autoclave has double walled chamber and a boiler and these are mounted on a heavy duty mild steel stand. The inner made of thick stainless steel sheet and outer chamber is made of stainless steel/mild steel sheet. Automatic self closing device to prevent opening of the door while the sterilize is in operation . Stainless steel steam generation unit fitted with easily replaceable heating element. Fitted with Pressure control switch. Pressure setting range 10 t020 psi. Dia x Depth Load Capacity (Approx.) A) 300 x 500 mm 3 KW 40 ltrs. B) 350 x 550 mm 4 KW 50 ltrs. C) 400 x 600 mm 5 KW 78 ltrs. D) 450 x 600 mm 5 KW 98 ltrs. E) 500 x 750 mm 6 KW 152 ltrs. f) 400 x 1000 mm 9 KW 162 ltrs. |
|
|
Robust and rigid construction, designed for all type of bulk sterilization which are commonly required in medical, Agriculture and Pharmaceuticals. This is triple walled with steam jacket and separate boiler. The sterilizer has single place door. Inside and outside are made of stainless steel. All constructions are of stainless steel. Complete with dial type thermometer. Pressure control switch. Dia x Depth Load Capacity (Approx.) a)400 x 600 mm 6 KW 78 ltrs. b)400 x 1100 mm 9 KW 162 ltrs. c)500 x 900 mm 9 KW 165 ltrs. d)500 x 1200 mm 9 KW 221 ltrs. Note: Please ask for other capacities and size of your requirement. |
Temperature range ambient temperature to 60º C. Temperature ± 1º C with built-in horizontal ‘L’ shape thermometer. The humidity is controlled by humidifier from atmospheric humidity num/stainless steel and outside mild steel painted in epoxy powder coating. The door has glass window. To work on 220/230 volts A.C. Inside water tank is made of stainless steel. Size inside Chamber W D H Capacity (Approx.) a) 455 x 455 x 455 mm 95 ltrs. B) 455 x 455 x 710 mm 147 ltrs. c) 605 x 605 x 605 mm 225 ltrs. d) 605 x 605 x 910 mm 335 ltrs. Optional: i) Hygrometer (Humidity indicator). Ii) Digital temperature controller-cum-indicator. iii) Imported thermostat “EGO”/”JUMO” German with the accuracy of ± 0.5º C. iv) Microprocessor PID digital temp. Indicator-cum-controller. v) Automatic electronic controller with digital display for Temp.& Humidity combined. vi) Automatic voltage stabilizer 3 KVA (recommended). |
|
|
General specification as EDI-83 but with added specification for low temp. Control & humidity. The inner working chamber is made out of stainless steel. The temperature can be controlled from 10º C to 60º C ± 2º C and humidity from 55% to 95% ± 5% RH Temperature below ambient is controlled by hermetically sealed compressor complete with accessories provided below the unit. Two stainless steel water reservoirs heated by immersion heaters are provided to create humidity. Complete with all accessories. Control panel provided with control switches and indicators. Chamber size in mm W D H Capacity (Approx.) a) 455 x 455 x 455 mm 95 ltrs. B) 455 x 455 x 710 mm 147 ltrs. c) 605 x 605 x 605 mm 225 ltrs. d) 605 x 605 x 910 mm 335 ltrs. OPTIONAL: i) Hygrometer (Humidity indicator). ii) Microprocessor PID digital temp. Indicator-cum-controller. iii) Automatic electronic controller with digital display for Temp.& Humidity combined. iv) Automatic voltage stabilizer 3 KVA (recommended). |
Used to storing cadaverous under low temperature cool condition in order to prevent decomposition. These units are double walled with outer made of M.S. sheet duly painted and inner wall of stainless steel. Front opening covered door with magnetic gasket lock & key and handle individual chambers are provided independent lock with duplicate keys. Trays made of G.l. sheet to carry dead bodies are provided with handles. Trays travel on rollers fitted with ball bearing for easy movement. Hermetically sealed compressor serves refrigeration unit, to maintain temperature range of 2º C to 5º C or (-) 15º C to (-) 20º C (as ordered) Unit is fitted with Digital Temperature Indicator-cum-controller. Works on 220/230 volts A.C. Power supply. Capacity Temp. Temp. Voltage Stabilizer a)Single Body 2º to 5º C -15º to -20º C 3 KVA b)Two Bodies 2º to 5º C -15º to -20º C 4 KVA c)Three Bodies 2º to 5º C -15º to -20º C 5 KVA d)Four Bodies 2º to 5º C -15º to -20º C 8 KVA e)Six Bodies 2º to 5º C -15º to -20º C 8 KVA |
|
|
Blood bank chamber is a most versatile unit for blood bank mounted on a sturdy angle frame. The inner chamber is made up of stainless steel sheet and outer of mild steel sheet duly powder coated paint. Caster wheels provided for easily mobility. The temperature is maintained in 4º c to 6º c with forced air circulation ensures uniform temperature, for storing blood bottles or blood bags. Temperature is controlled by microprocessor PID digital temperature controlled-cum-indicator and triggers the audio visual alarm in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with door operated alarm and power supply failure alarm, as a safety devices. A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance cooling coil runs all around the cabinet to maintain uniformity of temperature. The entire refrigeration unit is housed at bottom. Two doors are provided. Inner door is of transparent acrylic sheet for easy viewing inside the chamber. Outer door is duly insulated for proper sealing from external environment and is lock able. Drawers provided for holding bags. Suitable Available in following capacities:- a) 85 liters (50 blood bags) b) 165 liters (110 blood bags) c) 200 liters (200 blood bags) d) 280liters (250 blood bags) e) 400 liters (360 blood bags) Optional : i) Chart type temperature recorder. ii) Voltage stabilizer. (recommended |
Vaccine storage cabinet, the most versatile unit for vaccine for storage. Inner chamber made of stainless steel external mild steel sheet body of rigid steel frames. Insulated thoroughly provided with face fitting doors, complete with self-closing hinges lockable fasteners. Cabinet is fully sealed to avoid spilling and contamination from external environment. Temp. ranges from 4º C to 6º C. Available in various sizes for keeping vaccines bottles. Drawers with clear Perspex front and index card holders. Temperature controlled and displayed by Microprocessor PID digital temperature controlled-cum-indicator. Audio visual alarms are triggered, in the event of fluctuations exceeding permitted tolerance level. Suitable to work on 220 V, single phase, 50hz, AC supply. Available in following size:- a) 450x400x850 mm. b) 600x675x850 mm. OPTIONAL: i) Chart type Temperature recorder. ii) Voltage Stabilizer. (Recommended) |
|
|
Double walled with inner chamber made of S.S and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to -20º C is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and id mounted on caster wheels. Unit is fitted with solid State Digital Temperature Indicator-Cum-Controller. Horizontal Chest type models are supplied in a single compartment where as vertical models are supplied with three stainless still storing shelves. Capacity: 4 cuft. 6 cuft. 10 cuft. 12 cuft. Optional: Supply with automatic voltage stabilizer. Note: Please ask for other capacities and sizes of your requirement. |
Humidifier is basically an atomizing humidifier of splash plate rotating disc type. Design to give relative humidity as high as upto 95% rh in enclosed areas. Humidifier is a portable unit body made of aluminium/ stainless steel. Capable of atomizing upto three liters of water in an hour at full evaporation in the driest possible ambient conditions. Provided with automatic flout valve assembly to work on 220v AC. Capacity: 5 liters optional: Control box with humidistat for controlling. |
|
|
(Fitted with time controlled safety device in, case humidity controller fails, for safety of the compressor) These are water condensing type, based on “Refrigeration Cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and mounted on a study angle iron frame. Fitted with caster wheels. It removes excess moisture from the atmosphere and OS fitted with hermetically sealed compressor. Heat exchanger and water condensing coils are made of copper. Water collection tank provided below the unit to collect condensate water. Humidity is controlled by humidity controller incorporated in the unit, up to 30% ± 3% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have a independent window type Air conditioner to much with the dehumidifies heat load in the room. Suitable to work on 220/230 volts A.C. Supply. |
Specification as per EDI- 89A but fitted with digital humidity indicator-cum-controller in lieu of analog controller. Optional: Automatic voltage stabilizer 4. 0 KVA. (recommended) |
|
Mr. Varun Chopra
(CEO)
Edutek House, 29- B, Inderpuri, Ambala Cantt
Ambala,
Haryana -
133 001,
India
Telephone: +(91)-(171)-2654329
© Edutek Instrumentation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
