 |
| Home | About Us | Our Products | Contact Us | Enquiry |
|
| Prominent & Leading Manufacturer and Exporter from Ambala, we offer Infact Incubator such as Infant Electric Incubator, Infant Radiant Warmer / Baby Radiant Tube Heater, Resuscitation Unit and Phototherapy Treatment Units. |
|
EII-149. 53• the controller is based on micro computerized system. • large bright displays are easy to monitor and for viewing from a distance. • digital display system provided to measure the infant temperature, air temperature and to set the required temperature• feather touch keys provided for easy operation. • bar graph led system provided to indicate the heater output. • fault indication and alarms for • baby probe failure• air probe failure• high temperature• low temperature• high temperature cut off• heater failure• fan failure• power failure• baby probe / air probe is made of highly sensitive sensor and interchangeable which does not need field calibration, the probe is made up of silicon sheathed cable, which allows easy cleaning. • iv stand provided• storage drawers provided• large baby tray provided• trendelenburge / fowler system provided• unit is powder coated• hygrometer provided to indicate the relative humidity in the baby compartment. width : 1040 mmdepth : 600 mmheight : 1450 mmweight : 45 kgs approx. Baby bed size : 550 x 390 mmtilt : + / - 8o crecommended environment for operation : 24o c to 30o c. Humidity : 0 to 95 % r / helectrical : 230 v ac + / - 10 % 50 hz. Heater wattage : 250 watts max. Over all wattage : 450 watts when heater, fan is on. |
EII-149. 54• the controller is based on micro computerized system. • servo and manual modes. • self test system provided• large bright displays are easy to monitor and for viewing from a distance. • double digital display system provided to measure the infant temperature and to set the required temperature• feather touch keys provided for easy operation. • bar graph led system provided to indicate the heater output. Fault indication and alarms for • baby probe failure• high temperature• low temperature• high temperature cut off• heater failure• power failure• baby probe is made of highly sensitive sensor and interchangeable which does not need field calibration, the probe is made up of silicon sheathed cable, which allows easy cleaning. • single element imported ce marked ceramic heater placed in a parabolic reflector. • detachable baby trolley provided with large baby tray made up of stainless steel frame with three side acrylic collapsible walls. • iv stand provided• trendelenburge / fowler system provided• unit is powder coated• observation lamp provided• monitor tray provided physical parameters : length : 700 mmwidth : 430 mmworking level from the ground : 840 mmweight approx : 40 kgcastors : 75 mmrecommended environmental specifications: operating temperature range : 20o c to 33o c. Storage temperature range : -25o c to 60o coperating humidity range : 0 – 100 % rh skin temperature range : 32o c to 38o caccuracy : + / - 0. 2o cresolution : 0. 1o cprobe interchangeability : + / - 0. 2o cinfant required temperature range : 32o c to 38o cheater output controllable from 0 to 100 % in manual mode (continuously variable) observation lamp : halogen based. electrical specification electrical supply : 230 v ac + / - 10 % 50 hz. Power consumption with heater at max output : 750 w. |
|
|
Eii-149. 55• the controller is based on micro computerized system. • servo and manual modes. • self test system provided• large bright displays are easy to monitor and for viewing from a distance. • double digital display system provided to measure the infant temperature and to set the required temperature• feather touch keys provided for easy operation. • bar graph led system provided to indicate the heater output. • fault indication and alarms for • baby probe failure• high temperature• low temperature• high temperature cut off• heater failure• power failure• baby probe is made of highly sensitive sensor and interchangeable which does not need field calibration, the probe is made up of silicon sheathed cable, which allows easy cleaning. • single element imported ce marked ceramic heater placed in a parabolic reflector. • the large baby tray made of stainless steel frame with three side acrylic collapsible walls. • iv stand provided• trendelenburge / fowler system provided• unit is powder coated• observation lamp provided• monitor tray provided phototherapy: a halogen based phototherapy unit provided for hyperbilirubinaemiamanagement. Three halogen lamps are fitted on either side of the over headbox. It is fitted in an angle position to focus the radiation on the infant formaximum effectiveness. Apgar timer:the digital apgar timer is switched on at the moment of birth and an acoustic alarmwill sound after 1, 5, 10, 15 and 20 minutes, reminding to examine the new bornaccording to the apgar scheme. x-ray cassette tray:the neonatal resuscitation unit heater box swivels away from the baby bedto make room for x-ray unit. Convenient tray assists you to achieve x-rayswithout disturbing the baby. electrical slow suction: the slow suction unit is designed to work on latest diaphragm technologyand results in being maintenance free, noiseless and provides highperformance. The vacuum level can be adjusted with the regulator. A vacuumgauge provided to monitor the pressure. resuscitator: the resuscitator allows the resuscitation test of distressed newborns indelivery room or in case of emergency. Reanimation is performed withpositive pressure to the mask or endo tracheal tube with manual control andfree expiration. The minimum and maximum pressure values can be presetand are clearly indicated on the monometer. The resuscitator operates whenconnected to the air oxygen mixer or through any other flow meter. |
EII-149. 56the phototherapy units are established for the treatment of acne ohyperbilirubinemia, which greatly reduces the need to resort to costly,relatively complex, exchange transfusion of blood. The medical blue tubegive high output of light in the therapeutic range, while the extendedspectrum of the white light tubes allow better observation of the infant's skin colorwhile in use. the phototherapy unit are mounted on a light weight mobile stand with fourcastors. They are easy to use and have the following features, Head tilt: top tray is tiltable and it can be locked at any desired angle. Thisfeature is of great help when used with radiant warmers. Height adjustment: the height adjustment facility enables the unit to beused with a variety of baby incubators, cribs and costs. Technical specifications stand type phototherapy unit height : 1565 mmwidth : 730 mmlength : 500 mmweight : 25 kgcastors : 50 mmfinish : powder coated power supply : 230 v + / - 10 % 50 hzpower consumption : 20 w each lamptotal power requirement : 240 wmain fuse : 1. 5 a trolley type phototherapy unit height : 1015 mmwidth : 730 mmlength : 525 mmweight : 20 kgcastors : 100 mmfinish : powder coated Power supply : 230 v + / - 10 % 50 hzpower consumption : 20 w each lamptotal power requirement : 160 wmain fuse : 1. 0 a. |
|
Mr. Varun Chopra
(CEO)
Edutek House, 29- B, Inderpuri, Ambala Cantt
Ambala,
Haryana -
133 001,
India
Telephone: +(91)-(171)-2654329
© Edutek Instrumentation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
