 |
| Home | About Us | Our Products | Contact Us | Enquiry |
|
| Manufacturer & Exporter of a wide range of products which include Irrigation Water Management such as Soil/Water Model Tank, Rainfall Simulator, Soil Moisture Suction Sand Table and Demonstration Infiltration Apparatus. |
|
For laboratory scale investigations of surface irrigation and related systems. Soil/Water Model Tank comprising: • bench mounted narrow sand tank 1000mm x 25mm x 450mm (LxWxD), with one large side formed from a sheet of transparent material • metal frame supporting sump tank from which water is pumped via a flowmeter to the soil surface • flood and drip surface outlets (two can be used together by fitting a Y-connector) • overflow system to remove surface water to sump; complete with user instructions manual. FEL2-A: 220-240V/1Ph/50Hz |
For use in simulated soil erosion and stabilisation studies. Rainfall Simulator comprising: • spray head assembly supported by metal stand • storage tank from which water is pumped to spray head via flow meter and control valve • small square test plots: field test plots: tilting stand for test plots • sample vessels: rain gauges: complete with user instructions and manual.
The Armfield Rainfall Simulator consists of a metal frame that supports the spray head assembly. The unit may be placed directly on the ground for field studies or used with its accessory tray for laboratory experiments. In use, water is pumped from the holding tank via a control valve to the spray nozzle. Water from the spray nozzle is interrupted by a horizontal rotating disc driven by a variable speed motor. Adjustable width apertures in the disc allow some water to pass and the remainder is recirculated via the tank. For use in field or laboratory electrical and water supplies are required. |
|
|
For the derivation of soil moisture characteristic curves. Soil Moisture Suction Sand Table comprising: • sand table, 300mm diameter • sliding suction control chamber giving tension range 0-800mm of water (using sandy-loam) • complete with three soil sample retaining rings (80mm diameter), instructions and manual. The Armfield equipment consists of a free-standing circular tank filled with saturated sand (not supplied). Equilibrated soil samples placed on the sand are then subjected to a known variable suction range of 0- 800mm of water. The suction is applied by means of a buried porous pipe and an associated sliding control chamber. In order to maintain the suction an uninterrupted low volume water supply is required. A lightweight cover is provided to prevent evaporative water loss during experiments and the table is large enough to permit the simultaneous evaluation of several samples. |
For the laboratory demonstration of infiltration processes. Demonstration Infiltration Apparatus comprising: three graduated Perspex cylinders, resting on a permeable support screen, into which soil samples are placed. The complete apparatus is supported by a metal stand and may be bench mounted; complete with user instructions and manual. The Armfield Demonstration Infiltration Apparatus provides a simple but effective laboratory demonstration of the infiltration processes which are fundamental to any form of irrigation. The unit comprises three transparent cylinders in which soil samples are placed. Water poured onto the soil surface can then be observed as it infiltrates the sample. Each cylinder features a graduated scale so that observations may be quantified. Each cylinder incorporates an air breather and a perforated base plate to facilitate drainage without undue soil loss. Cold water supply Height: 0.9m |
|
Mr. Varun Chopra
(CEO)
Edutek House, 29- B, Inderpuri, Ambala Cantt
Ambala,
Haryana -
133 001,
India
Telephone: +(91)-(171)-2654329
© Edutek Instrumentation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
